 |
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
||||||
 |
|
||||||||
 |
 |
|
|||||||
 |
|
||||||||
 |
 |
|
|||||||
 |
|
||||||||
 |
 |
|
|||||||
 |
|
||||||||
 |
|
||||||||
 |
|
||||||||
 |
 |
|
|||||||
 |
|
||||||||
 |
 |
|
|||||||
|
FAQ's
|
| Here are some commonly asked questions, if you have any questions that are not answered below, please use our contact us page to get in touch with us |
| Q. When you install my automated gate system, is the power supply from the house to the gate included? |
| A. Yes, All electrical and ground work will be undertaken by our installation team including running cables from your house to the gate. |
| Q. What areas do you work in? |
| A. PBH Automated Gates Ltd will supply and fit automated and electric gates in Cheshire, Greater Manchester and The North West. |
| Q. Does the gate use much electricity? |
| A. No, It is a very economical system. Whilst the motors are running they typically use 200-300 Watts (roughly the same as a standard garden security light) |
| Q. Is the work guaranteed? |
| A. Yes all work and materials are guaranteed for 12 months |
| Q. My automated gate system is not working |
| A. Check the batteries in your remote control, also check the fuse or trip switches in your house. Ensure that the infrared sensors are clean and free of obstruction. If you have any further problems, Contact Us |
| WARNING : All work on automated gate systems and electrical systems must be carried out by a suitably qualified electrician, engineer or installer. Ensure that mains supply is disconnected before attempting any repair. |
© PBH Automated Gates 2003-2026
